HGH20CA Linear Guide Block — 20 mm Square Type, Interchangeable
The HGH20CA is the 20 mm square heavy-load block of the HG series, the most common size in machining centres and general automation. Mounting hole spacing follows the HG standard, so an existing HG block can be replaced without re-machining the carriage. Interchangeable blocks are supplied in C/H/P accuracy and Z0/ZA preload.
Specifications
| Model | HGH20CA |
| Size | 20 mm |
| Block type | Square, heavy load (C) |
| Mounting | Top tapped (A) |
| Accuracy grade | C / H / P (interchangeable) |
| Preload | Z0 / ZA (interchangeable) |
| Matching rail | HGR20 |
| Dynamic load C (kN) | 17.75 |
| Static load C0 (kN) | 37.84 |
| Block height H (mm) | 30 |
| Block width W (mm) | 44 |
| Block length L (mm) | 77.5 |
Options
- Dust protection: ZZ / KK / DD
- Grease nipple or oil port
- Special machining on request
Matching rail
HGR20 rail is cut to order from 100 mm. See rail options.
Downloads
STEP (AP214) model and 2D drawing for this size are available on request — ask us and we will email them.
FAQ
| Is HGH20CA interchangeable with other HG-standard blocks? | Yes. Mounting hole spacing and rail profile follow the HG standard, so an existing drawing carries over without modification. |
| Can I buy the block and the rail separately? | Yes, up to accuracy P and preload ZA. SP/UP accuracy and ZB preload are supplied as a matched set only. |
| What is the difference between C and H load type? | C is the standard heavy-load block; H is the higher-load variant with a longer body. Both run on the same HGR20 rail. |
Request a quote for HGH20CA
The form backend is being connected. If the button does not work today, send the same details to [email protected] or WhatsApp +86 131 7615 3666.