HGH25CA Linear Guide Block — 25 mm Square Type, Interchangeable
The HGH25CA is a 25 mm square-type heavy-load block, the most common size on machining centres and automation gantries. It uses the HG mounting pattern, so existing drawings and bolt holes carry over. Interchangeable blocks cover Z0/ZA preload and C/H/P accuracy; SP/UP and ZB come as matched sets.
Specifications
| Model | HGH25CA |
| Size | 25 mm |
| Block type | Square, heavy load (C) |
| Mounting | Top tapped (A) |
| Accuracy grade | C / H / P (interchangeable) |
| Preload | Z0 / ZA (interchangeable) |
| Matching rail | HGR25 |
| Dynamic load C (kN) | 26.48 |
| Static load C0 (kN) | 56.19 |
| Block height H (mm) | 40 |
| Block width W (mm) | 48 |
| Block length L (mm) | 84 |
Options
- Dust protection codes: ZZ / KK / DD (standard series)
- Heavy-duty dust codes SH / ZH / KH / DH (HG20–45 only)
- Grease nipple or oil port
- Special machining on request
Matching rail
HGR25 rail is cut to order from 100 mm. See rail options.
Downloads
STEP (AP214) model and 2D drawing for this size are available on request — ask us and we will email them.
FAQ
| Is HGH25CA interchangeable with other HG-standard blocks? | Yes. Mounting hole spacing and rail profile follow the HG standard, so the block fits existing HG25 rails. |
| Can the block and rail be bought separately? | Yes, in Z0/ZA preload and C/H/P accuracy. SP/UP accuracy and ZB preload are supplied as a matched set only. |
| Which rail length do I need? | Use L = (n − 1) × P + 2 × E with P = 60 mm and E = 20 mm for HGR25. Standard lengths run from 220 mm to 1240 mm. |
Request a quote for HGH25CA
The form backend is being connected. If the button does not work today, send the same details to [email protected] or WhatsApp +86 131 7615 3666.